FibarMat Wear Mats
 
FibarMat Wear Mats



It's not just the right thing...
It’s the law!
Ensure compliance with FibarMat wear mats.


Now on sale–$175 each!
FREE shipping in the continental U.S.

The ADA (Americans with Disabilities Act) Federal Accessibility Law requires that all public playgrounds maintain a level surface to provide accessibility to the disabled. FibarMat wear mats help accomplish this by preventing the displacement of Fibar Engineered Wood Fiber at heavy use areas.

FibarMats have beveled edges to improve accessibility. And they pay for themselves by greatly reducing the need for raking in heavy use areas. FibarMat wear mats must be installed under all swings, tire swings, slide exits and all other wear areas including sliding poles to ensure compliance with the new law.
SPECIFICATIONS  
Dimensions: 36” x 36” x 1.5”
Weight: 57 lbs
Composition: Recycled Rubber
Safety: Meets or exceeds CPSC and ASTM 1292 requirements
Accessibility: Complies with new Federal ADA Law 
   

EASY TO INSTALL

1. Install under all swings and at slide exits. Also install under other heavy-use equipment, including sliding poles.

2. Install the FibarMat flush with the surface of the engineered wood fiber. Rake out an area of 39” x 39” x 2” and make sure the area is as level as possible. Drop in the FibarMat and rake back the wood fiber to the edge of the FibarMat.

3. To install an FibarMat at the base of a sliding pole, cut the mat with a sharp utility knife so that the pole goes through the center.

LOWER MAINTENANCE COSTS

With FibarMat wear mats, your playground surface needs less maintenance. Over time, a modest, one-time investment will dramatically reduce labor costs.


FibarMat wear mats are now on sale for only $175.00 each. FREE shipping in the continental U.S.

Disclaimer - There will be added costs for a liftgate delivery or residential delivery.

$175.00 FREE SHIPPING

(in continental U.S. only)

Repair Kit

Repair Kit + Easily repair non-compliant holes and wear in recreational surfacing with a FIBAR Poured-In-Place Surfacing Repair Kit for wear course repairs.

 

This all-in-one kit is shipped in a bucket and includes: 

 
  • 5 square feet* of pre-selected color rubber granules
  • 1 utility knife

  • 1 small brush

  • 1 container of urethane binder

  • 1 pair of gloves

  • 1 trowel

 

Kit comes in a wide variety of color mix options - 100% color or 50/50 color/black mix.

Patch wear course holes with standard circle patches or create fun shapes to add play value to your surface.

Repair Kit Instructions

Repair Kit Color Options

 

Before

After

Before

After

Easily repair non-compliant holes and wear in recreational surfacing with a FIBAR Poured-In-Place Surfacing Repair Kit for wear course repairs.

$199 - $209 FREE SHIPPING

(in continental U.S. only) BUY NOW